(Utkast) Kommisjonens gjennomføringsforordning (EU) .../... om fastsettelse av regler for anvendelsen av europaparlaments- og rådsdirektiv 2008/98/EF med hensyn til kriterier for å avgjøre når plastavfall opphører å være avfall
Rammedirektiv for avfall 2008: kriterier for å avgjøre når plastavfall opphører å være avfall
Utkast til kommisjonsforordning godkjent av komite (representanter for medlemslandene) og publisert i EUs komitologiregister 9.11.2026
Tidligere
- Utkast til forordning lagt fram av Kommisjonen 23.12.2025 med tilbakemeldingsfrist 26.1.2026
Bakgrunn
(fra kommisjonsforordningen)
(1) Union-wide end-of-waste criteria for plastic waste are key to strengthen the single market for recycled plastics and for secondary raw materials ready to be used in the manufacturing of new goods, reduce administrative burdens for recyclers, notably small and medium-size enterprises, and costs related to the shipment of plastic waste, and ensure a stable supply of high-quality recyclates across the Union while promoting circular economy. The forthcoming Circular Economy Act will address end-of-waste criteria as a means to foster a higher supply of high-quality recyclates and stimulate demand for secondary materials and circular products while bringing down feedstock costs.
(2) The European Commission’s Joint Research Centre (the ‘JRC’) carried out a scoping study to identify a list of priority waste streams for which to develop further Unionwide end-of-waste criteria. That study highlighted five waste categories with the greatest potential, ranking plastic waste as the top priority stream. Following that study, JRC published a report on technical proposals for EU-wide end-of-waste criteria for plastic waste (the ‘report’), and started working on technical proposals for EU-wide end-of-waste criteria for textiles and the mineral fractions of construction and demolition wastes.
(3) According to the above-mentioned report, the plastics with the highest potential suitable for Union-wide end-of-waste criteria are thermoplastic polymers, and blends of thermoplastic polymers, regardless of the polymer type and the source of the waste containing plastic. Thermoplastic polymers are polymers that can soften with the application of heat and solidify again upon cooling, allowing them to be remoulded. Examples of thermoplastic polymers are polyethylene (PE), polyethylene terephthalate (PET), polypropylene (PP), polystyrene (PS), and polyvinyl chloride (PVC). Thermoplastic polymers are the most common plastics and are also referred to as commodity plastics.
(4) The criteria laid down in this Regulation determine when plastic waste ceases to be waste and ensure that the output material resulting from recycling is a polymer or plastic that: i) is ready for use in the production of new plastic products or articles containing plastic parts; ii) has a market or for which a demand exists; iii) complies with existing legislation and standards applicable to products; and iv) does not lead to overall adverse environmental or human health impacts. The output plastic that complies with all the end-of-waste criteria is a plastic recyclate. If the output plastic resulting from recycling is used for other purposes than for the production of new plastic products or articles containing plastic parts, such as used for energy recovery, as an input material for chemical or fuel production, or for backfilling operations, it should not be granted the end-of-waste status in accordance with the criteria specified in this Regulation, including if such material had previously obtained end-of-waste status under this Regulation. To facilitate the market of secondary raw materials, the end-of-waste criteria set in this Regulation apply to the recycled plastic and not to the final plastic product or article containing plastic parts.
(5) While it is possible to produce certain products with a material that has reached the end-of-waste status according to this Regulation, it may be necessary to carry out standard post-processing treatments to ensure that the recycled plastic meets customer requirements for specific applications. This is the case to produce recycled plastic food contact materials in accordance with Regulation (EC) No 1935/2004 of the European Parliament and of the Council and Commission Regulation (EU) No 2022/16165 . According to these Regulations, plastic input must be decontaminated to ensure the material is suitable for food contact.
(6) Recycling for the purposes of this Regulation includes mechanical recycling and solvent-based recycling, that is also referred to as physical recycling or dissolution recycling, which retain the polymeric chains that constitute the plastic, except for small unintentional changes in the molecular weight distribution of the polymeric chains. Therefore, merely performing a preliminary sorting operation or visual checking of the input plastic should not be considered as recycling in scope of this Regulation. The recyclate resulting from recycling should have similar shape and properties to virgin plastic, such us flakes, powder, granules, and granulates.
(7) To ensure that the largest quantity of plastic waste is recycled, Member States may maintain or adopt national end-of-waste criteria, decide on a case-by-case basis, or take appropriate measures concerning plastic waste, when such national end-of-waste criteria, case-by-case decision, or measures fall outside of the scope of this Regulation.
(8) Regulation (EU) 2024/1157 of the European Parliament and of the Council6 establishes rules for the export of plastic waste from the Union. That Regulation prohibits exports of plastic waste for disposal operations as well as exports of plastic waste classified under entries A3210 and Y48 of that Regulation to countries not in scope of Decision of the OECD Council on the Control of Transboundary Movements of Wastes Destined for Recovery Operations7 (‘non-OECD countries’).
(9) Regulation (EU) 2024/1157 requires that any shipment of clean, non-hazardous plastic waste classified under entry B3011 of that Regulation outside the Union is (i) subject to the procedure of prior written notification and consent referred to in Title II, Chapter 1, of that same Regulation; and (ii) complies with binding rules concerning its content of contamination8 . Moreover, from 21 November 2026, that Regulation also prohibits the export of plastic waste classified under entry B3011 to ‘non-OECD countries’.
(10) In view of the above-mentioned rules on exports of plastic waste from the Union, this Regulation should establish end-of-waste criteria for plastic waste that do not undermine those export restrictions. To facilitate the distinction of the rules laid down in the Regulation (EU) 2024/1157 from the ones established by this Regulation, and their enforcement, it is important to ensure that the thresholds of the level of contamination for classifying waste under entry B3011, and of foreign materials, i.e. plastic polymers not in scope of this Regulation and non-plastic materials, for determining that plastic waste fulfils end-of-waste criteria, are not at the same level. Thus, a threshold of <1.9% for foreign materials in the plastic recyclate is established as one of the end-of-waste criteria for plastic waste. The threshold ensures that: i) the risks of circumventing the rules on shipment of plastic waste are reduced; ii) the threshold of foreign materials is technically and economically feasible and in line with current plastic recycling practices in Member States; iii) the requirements for recyclers are unequivocally defined; and iv) the risk of not being able to use the recycled plastics in the Union is reduced.
(11) To demonstrate compliance with the end-of-waste criteria, the producer of the plastic recyclate should implement a new quality management system or adjust an existing one, and the producer or importer should issue a statement of conformity for plastic waste which has ceased to be waste. The quality management system should include information on the treatment process, quantities of input plastic, of plastic recyclate, and of output plastic.
(12) Based on the monitoring of the implementation of this Regulation, and to consider technological developments for treating plastic waste, including chemical recycling as one of the recovery operations for which end-of-waste criteria could apply, the Commission should assess and, where appropriate, review this Regulation
(13) The measures provided for in this Regulation are in line with the opinion of the committee established by Article 39 of Directive 2008/98/EC.
(14) To ensure that operators have sufficient time to adapt to the criteria determining when plastic waste ceases to be waste, it is necessary to defer the application of this Regulation,